Bonjour, j'ai trouvé ça http://eric.aling.tripod.com/PB/pberrors.htm (en espérant que ça soit toujours à jour)

R0001      Application reference could not be resolved. The application object can not be found. In most cases this happens when the application object PBL is created as EXE and PBD at the same time.
R0001       Divide by zero
R0002     Null object reference or Error failure loading dynamic library. A referenced object is not valid (not created). Can also occur when the object in question cannot be found in the EXE or in one of the PBDs/DLLs.
R0002       Null object reference
R0003     Array boundary exceeded. The value of the index does not exists in the array.
R0004       Enumerated value is out of range for function
R0005     Negative value encountered. Some PowerBuilder functions do not allow to have negative values passed to them.
R0006     Invalid datawindow row/column specified. Check for row 0 or rownumbers higher than the rowcount or for invalid column names.
R0007     Database interface does not support remote procedure calls, or Error unresolvabled external <object> when linking reference. In the latter, when running the exe, be sure all PBDs/DLLs can be found.
R0007       Unresolvable external when linking reference
R0008       Reference of array with null subscript
R0009     Unresolved external when linking reference. In most cases, a PBL is missing from the library searchpath. In other words, at runtime, a specific object can not be found.
R0009       DLL function not found in current application
R0010     Unsupported argument type in dll function <function>. Check what datatypes are used and check if they are supported.
R0011     Internal Runtime engine Failure-Contact Powersoft tech. Support (NOOP) or Object file <objectfile> is out of date must be converted to later version. Full rebuild!
R0011       Object file is out of date and must be converted to current version
R0012     Internal runtime engine failure. Contact PowerSoft Technical Support. NOOP. Full Rebuild! Or error: dw column type does not match getitem type. Check the GetItemxxx functions and see if the datatype of the column you get the data from matches with the datatype of the variable you put it in.
R0012       DataWindow column type does not match GetItem type
R0013       Unresolved property reference
R0014     Error opening DLL library <name>.DLL for external function. DLL can not be found or DLL is not of the same alignment as the PB EXE (bot should be 16bit or 32bit)
R0015     Error calling external function. External function does not exists in the given DLL. Check name of function. In 32bit, these are also case sensitive.
R0016     Maximum string length exceeded. String exceeds 60000 char limit. With 16bit PB, strings can have as much as 60000 chars. Or negative argument for the space() function.
R0017       DataWindow referenced in DataWindow object does not exist
R0018     Function doesn't return value. PB expects the function to return a value but due to a if-then-else statement, the function does not return a value.
R0019     Cannot convert string in Any variable to <variable>. The datatype of the contents of the ANY variable must match the datatype of the variable to which you want to assign the ANY variable.
R0020     SQL has not been properly prepared. Wrong dynamic Sql coding.
R0020     DB command has not been successfully prepared. Wrong dynamic Sql coding.
R0020       Database command has not been successfully prepared
R0021     Bad runtime function reference. The called function has been changed while the scripts calling this function have not been regenerated to see the new function changes. Regenerate!
R0022     Unknown object type <objecttype>. Wrong dynamic coding. PB can not create an object with a specified type it doesn’t know (mostly specified as a string with typos).
R0023     Cannot assign object of type <objecttype1> to variable of type <objecttype2>. You cannot assign a window to a menu object for instance.
R0024     (External) Function call does not match function definition. Check function definition and check this with the (external) function declaration.
R0025     Double or Real expression has overflowed. Dubious error.
R0026     Runtime assignment not supported...(runtime assignment). Some properties are readonly and many not be modified a runtime such menuitem shortcuts, window windowtypes etc.
R0026       Field name assignment not supported
R0027       Cannot take a negative to a noninteger power
R0028       VBX Error: name
R0029     Specified argument type differs from required argument type at runtime. Regenerate to see the offending line / object.
R0029       Nonarray expected in ANY variable
R0030     External object does not support data type <datatype>.
R0031       External object data type namenot supported
R0032     Name not found calling external object <object>. OLE error, dynamic function calls fails because the function does not exist
R0033     Invalid parmameter type calling external object function. Function fails because the OLE object function expects another datatype for one of its arguments.
R0034     Incorrect number of parameters calling external function <function name>
R0035     Error calling external object function <function>. The external function call fails because for instance the OLE object/server has died.
R0036     Name not found accessing external object property <property>.
R0037     Type mismatch accessing external object property <property>
R0038       Incorrect number of subscripts accessing external object property name
R0039     Error accessing external object property <property>.
R0040     Argument mismatch with any type at line x of the function.
R0040       Mismatched ANY data types in expression
R0041       Illegal ANY data type in expression
R0042     Specified argument type differs from required argument type at runtime in DLL function <externalfunction>. One of the external function arguments except a value of another type.
R0043     Parent object doesn't exist
R0044       Function has conflicting argument or return type in ancestor
R0045     Internal table overflow, max number of objects exceeded. With 16bit PB, you can have a maximum of 2729 objects alive at one time. 32bit PB, limited by hardware.
R0046     Specified arguments differs from definition. The called function/event is defined different. Regenerate the calling object to find the offending code.
R0046       Null object reference cannot be assigned or passed to a variable of this type
R0047       Array expected in ANY variable
R0048       Size mismatch in array to object conversion
R0049     Type mismatch in ANY to object conversion
R0049       Type mismatch in array to object conversion
R0050     Application reference can not be resolved. One possibility is that some (PB) DLLs are missing or of a wrong version. See R0001 also.
R0050       Distributed Service Error
R0051     Bad Argument List for Function/Event
R0052       Distributed Communications Error
R0053       Requested server not active
R0054       Server not accepting requests
R0055       Request terminated abnormally
R0056     DB interface does not support remote procedure calls
R0056       Response to request incomplete
R0057     Not connected to DPB server
R0058       Object instance does not exist
R0059       Invalid column range
R0060     Internal runtime engine failure. contact ps tech support (noop). This error happens when migrating. Regenerate all sources in the old PB environment first before migrating. Secondly, what when the error occurs and modify (outcomment) the source in the old PB env and migrate again.
R0060       Invalid row range
R0061       Invalid conversion of number dimensional array to object
R0062       Server busy
R0063       Function/event with no return value used in expression
R0064       Object array expected in left side of assignment
R0065     Dynamic function not found. If you cann a function usingthe DYNAMIC keyword and the function can not be found at runtime, you get this error. Or, there is a pass by value/reference mismatch.
R0066       Invalid subscript for array index operation
R0067       NULL object reference cannot be assigned or passed to an autoinstantiate
R0068       NULL object reference cannot be passed to external DLL function name
R0069       Function name cannot be called from a secured runtime session
R0070       External DLL function name cannot be called from a secured runtime session
R0071       General protection fault occurred
R0072       name failed with an operating system error code of number
R0073       Reference parameters cannot be passed to an asynchronous shared/remote object method
R0074       Reference parameters cannot be passed to a shared object method
R0075       The server has forced the client to disconnect
R0076       Passing NULL as a parameter to external function name
R0077       Object passed to shared/remote object method is not a nonvisual user object
R0078       Listen can only be done in Enterprise version of PowerBuilder
R0079       The argument to name must be an array
R0080       The server has timed out the client connection
R0081       Function argument file creator must be a four character string
R0082       Function argument file type must be a four character string
R0083       Attempt to invoke a function or event that is not accessible
R0084       Wrong number of arguments passed to function/event call
R0085       Error in reference argument passed in function/event call
R0086       Ambiguous function/event reference
R0087       The connection to the server has been lost
R0088       Cannot ask for ClassDefinition Information on open painter: name
R0089       5.0 style proxy objects are not supported. Copy the new style proxy that was generated at migration time
R0090       Cannot assign array of type name to variable of type array of name
R1004     Null object reference. See R0002.
R1005     Array boudary exceeded. See R0003
R1009     Unresolvable external <> when linking reference. See R0009.
R1012     Object file <> is out of date, must be converted to current version. Migrate / regenerate. When this is failing, export the object, change the contents and import it again. Backup first!
R1013     Object file <> is out of date, must be converted to current version. See R1012.
R1016     Error opening DLL <dllname> for external function <functioname>. See R0014.
R1017     Error calling external function. See R0035.
R1023     Bad runtime function reference. See R0021.
R1025     Cannot assign object of type <type1> to variable of type <type2>. See R0023.
R1032     Cannot find datatype.
R1034     Name not found calling external object function. See R0032.
R1037     Error calling external object function See.R0015.
R1041     Error accessing external object property <property> of <datawindow>.
R1053     ??
R1071     Function <functionname> cannot be called from a secured runtime session. Has to do with using the window plugin and the security settings in the Internet Explorer
R1075     Reference parameters cannot be passed to shared/remote objects.
R1078     Passing NULL as parameter to external function. Should be fixed.
R1085     Attempt to invoke a function or event that is not accessible (i.e private of protected )
R1090     Cannot ask for Class Definition on open painter (iow, cannot debug when painters are open)
R4198     OLE command failed. OLE error generated by OLE server.

elfeliz a écrit:

Par contre, sauf erreur de ma part, ceci est une liste des erreurs à l'éxécution...
Celles que je recherche sont celles que  PB soulève à la compil, au migrate au full/incremental build etc. qui correspondent souvent à des problèmes de signatures de fonctions, d'héritage etc.

Ce ne sont pas les mêmes, n'est-ce pas ?

en effet, au temps pour moi   

ah, une petite remontée sur ce vieux fil !

Je ne sais pas si c'est depuis la version 11.5 (j'avais pas spécialement regardé au moment de migrer...) mais ces codes sont présents dans l'aide.
Certains avec une petite explication (c'est toujours ça...).
D'autres pas :-)


Voilà, des fois que ça serve ;-)